Some 28mm Horse and Musket Civilians

Not all the figures in this post are freshly painted except for the gent in the brown coat and hat, but the rest were done later in 2024 and I don't think I've blogged them here, so I guess they count (count for what?  points?  prizes? 🤪).

Groom leads a horse out of the barn for a gentleman.   The groom and horse are from Foundry's 18th century civilian range, the gent in the hat is a Front Rank figure from their Napoleonic civilian range.  The barn is I think from Warbases.

It's funny what you see in photos that you don't see otherwise.   The poor groom looks like he has a bandage on his nose, when in fact I think it was just some pale flesh highlight that looked ok at the time.  I'll have to have a hard look at him and see if he needs fixing.   The gentleman is sold by Front Rank along with a packhorse, and I think he's meant to be a pedlar, but I decided to make him look a bit posh.   His clothing is probably too early 1800s for a Lace Wars game, but tant pis as they say. 

 MDF cart and cast metal horses from Warbases.  The kit includes a resin casting of straw as a load for the cart if one wishes.   The farm labourer is from Front Rank's Napoleonic civilians range, enjoying a tankard while stopping at a pub.

These figures could be used just as table dressing or as characters and plot points in a skirmish game like Sharp Practice.  That gentleman going for a ride could actually be a spy with valuable intelligence.   The straw in that cart could be hiding contraband or a deserter.   The farmer with the pitchfork could be a dashing intelligence officer in disguise or maybe he's just Theo from Plotzen. 

  

Thanks for looking.  Later this week, some ancients figures, and maybe a test drive of the Hail Caesar rules.  

Blessings to your brushes,  MP+

#Terrain Tuesday: Warbases MDF Fields and Ponds

Hello friends:  

I’ve been quiet here last week, which, as you might expect, was a busy one for my day job as a wargaming vicar, but time to catch up now that Holy Week is concluded.

Recently I needed some custom-made MDF bases and ordered them from Warbases in the UK, as my Canadian supplier didn’t seem to need the business.   While I was on the Warbases webstore, I saw that they offered fields and ponds, in a part of the store called Terrain Bases   It wasn’t clear to me that these were 2D images printed onto MDF, I had formed the mistaken idea that they were somehow 3D, which was my own misperception.

There wasn’t a full range in stock, but I ordered two field sets, one in spring (left) and one in autumn (right).  Here are the large pieces from each set, each with a stone wall and gate around the edges.  They blend nicely against my Geek Villain game cloth.  

And two small fields in each set, again, spring (left) and autumn (right).

And I bought a set of ponds, which includes a generous five separate ponds.

28mm figure stand for scale.

And a 6mm stand for scale.  In 6mm, depending on the game scale (eg, Blucher where this one stand would represent a brigade), these would be decent sized lakes!

In 28mm, the large stand would accommodate a four or five based unit quite nicely to represent a terrain objective or a defensible terrain feature, such as a walled field.  Useful if one didn’t have enough actual wall section models.

Some folks might balk at the idea of putting 2D terrain representations on the table, which is fine, but for a fast game or if one is travelling light to a club or convention, these models might well be fit for purpose.   The quality of the printed images of the field and pond sections is pleasing, so they are a definite step up from fields and ponds of cut felt.

Cheers and blessings to your tabletops.

MP+

 

 

 

 

#Terrain Tuesday: Warbases Prussian Barn WIP

Hello friends:

I’m reviving a feature here which I’ve called Terrain Tuesday.   Here’s a bit of progress on a project carried over from last year, this 28mm Warbases T-Shaped Barn from their Napoleonic Prussia series.   I can use these in a variety of horse and musket settings, and this particular model could possibly be used in a North American setting, assuming the barn was built by settlers of German origin.

I wasn’t happy with the MDF roof, so I ordered some of the Warbases cardboard roof tiles sets and laboriously glued them on.

Now I have to decide how to paint the roof.   I was thinking a brown base coat, and then a dry brush of red, as most German roofs I’ve seen in paintings of the period seem to have red roofs.   Any advice?

Blessings to your modelling.  MP+

Terrain Tuesday: Adventures in Basing and Building

Recently I mentioned that our guest on Canadian Wargamer Podcast #11 was Joe Saunders, who runs a small but mighty enterprise called Miniature Landscape Hobbies.  I was so impressed with his method for large scenic bases that I tried it, and here’s the result.

To back up a bit, my previous method was to cut a piece of MDF purchased from a DIY store.  This was never very pleasant or satisfactory because I used a craft knife and could never get the lines straight enough, and it was also very taxing on my hands and wrists.  There was also the very real worry that I might inadvertantly cut myself.  Once the MDF was cut, I would texture it with plastic wood (usually from Lepage), use diluted white carpenter’s glue to apply texture (usually model railroad ballast) and then once dry paint brown, two successive drybrushes (yellow ochre first, then maple tan) and then apply flock and seal with a matte spray.

Joe’s technique is explained in this video.  Not to describe the whole method, but in brief I used two sheets of cut boxboard with the corrugations going in opposite directions.   I them coated it with diluted matte Mod Podge mixed with brown umber craft paint, and while it was wet I applied the grit (ballast mixed with some clean cat litter).   The next step according to Joe is to mix rubbing alcohol with brown acrylic ink and then use a pipette and apply the ink mixture while holding the base at an incline to allow the mixture to run freely. 

I didn’t have brown ink but I had some green ink, so I thought I’d experiment.  What I got was a pleasant greenish hue and in a few places the green ink turned the grit a bright green, suggesting clumps of foliage.  I showed this image below to Joe and he thought it was a “happy accident” and suggested a tan dry brush before adding flock. 

 

Here’s the finished base on the left, with the Warbases cottage from their Prussian Napoleonics range of buildings.   I spent much of the winter cutting up cereal boxes to make the tiles on the roof of the cottage, until some bright chap told me to by the pre-cut roof tiles from Sarissa.  I did that for the Warbases Prussian barn on the right, but couldn’t resist the allure of the cereal box and also cut out the stones for the first floor of the barn walls.  The base of the barnyard was also made according to Joe’s recipe.

I wanted some texture on the walls of the cottage, which were plain MDF sheets, so smeared them with carpenter’s plastic wood filler to give the impression of stucco.    I did the same with the wall section on the barn beneath the wood timbers.  Thankfully the wood timbers were all one laser cut piece so quite simple to apply onto the plastic wood before it dried.

Some 28mm figures shown for scale.  The barn is a beast!  It won’t be hogging a standard sized table for a big battle, but it will wok for a skirmish game such as Sharp Practice, with Prussian jaegers defending against marauding cossacks, I think.

Another view of the stone wall on the ground floor of the barn.  Not sure what door halfway up is all about.  In my part of Ontario you sometimes see barns with an earthen ramp leading up to a doorway which I am guessing is for transporting hay bales and fodder.   I should consider constructing something similar out of styrofoam.